Setup, Compatibility & Care
- Surface Preparation: Ensure the surface is clean, dry, and free from grease, oil, or loose particles. Lightly sand glossy surfaces to improve adhesion.
- Application: Stir the paint thoroughly before use. Apply using a brush or roller. Apply 2 coats for best results.
- Drying Time: Allow 16-24 hours between coats under normal conditions. Allow 7 days for full cure before heavy use.
- Ventilation: Ensure good ventilation during application and drying.
- Clean Up: Clean tools with a suitable solvent immediately after use.
Compatibility: Compatible with most common floor surfaces. Always test on a small, inconspicuous area first.
Care: Clean the painted surface with a mild detergent and water. Avoid abrasive cleaners.