Hansgrohe Raindance Select S 125 Hand Shower - 3 Spray Modes

Use the prominent 'Select' button located on the face of the hand shower. Press it to cycle through the three available spray modes: RainAir, Rain, and Whirl.

AirPower technology enriches the water with air. This makes the water droplets feel fuller, softer, and more voluminous, creating a more comfortable and luxurious showering sensation.

The showerhead features QuickClean technology. Simply rub your finger or a soft cloth over the silicone nozzles on the spray face. This will loosen and remove any limescale deposits.

Yes, this hand shower is designed to fit standard shower hoses with a universal connection size.

The showerhead requires a minimum pressure of 1 bar for basic function and performs best at 3 bar or higher. While it has AirPower technology to enhance the feel of the spray, it will still be limited by the available water pressure.

Yes, this hand shower is suitable for instantaneous water heaters. However, be aware that switching spray modes might cause slight, temporary temperature adjustments due to differing flow rates.

At 3 bar pressure, the flow rate is 15.5 l/min for RainAir and Rain modes, and 13 l/min for the Whirl mode.

Check that the shower hose is not kinked. Ensure the main water supply is fully open. Clean the QuickClean nozzles and check for any blockages in the shower arm connection.

Gently clean around the Select button and the spray face with a soft cloth and mild cleaner. Ensure no debris is lodged around the button mechanism.

This can sometimes occur with instantaneous water heaters when switching spray modes. Ensure your water heater is adequately sized for your needs. Check that the flow rate of the showerhead is within the heater's operational range.

Rub the silicone nozzles vigorously to dislodge limescale. If stubborn, use a 50/50 mixture of white vinegar and water applied with a cloth for a short period, then rinse thoroughly.