ForgeFix M4 x 45mm Cavity Wall Anchor - Silver

The correct drill bit size depends on the specific anchor and wall material. Check the packaging for this information.

No, these anchors are designed for hollow walls only.

Yes, each anchor comes with a universal cross pan head machine screw.

The weight capacity depends on the wall material. Always consider the weight of the item being secured and the wall's integrity.

The screws and the fixings are easily removed. However, for optimum performance it is recommended to replace the anchors after removal.

These anchors are suitable for most types of hollow walls, including fibreboard, plasterboard, and partitions.

A standard screwdriver or drill with a suitable bit will work. However, for repetitive installations, a specialist fixing gun is recommended.

The zinc-plated finish provides corrosion resistance, which helps to extend the lifespan of the anchors.

Ensure the drill hole is the correct size. If it is too large, try using a different anchor or filling the hole slightly. If it's a new installation, check that the anti-rotation teeth are gripping the wall material properly. If the anchor is old, replace the anchor.

Check if the screw is stripped or if the anchor has failed. Try a new screw or anchor. Make sure the item being secured isn't too heavy for the anchor's capacity.

Ensure the hole is clean and of the correct size. If necessary, slightly enlarge the hole with the drill. Make sure there is no obstruction inside the hole.