Warmlite Whitby 2KW Electric Fire - Brass

Yes, the Warmlite Whitby Electric Fire allows you to operate the realistic flame and coal effect independently of the heating function. This means you can enjoy the ambiance all year round, even when you don't need additional warmth.

While the Warmlite Whitby Electric Fire is designed with safety in mind, it is generally recommended to turn off all heating appliances when leaving the room unattended for extended periods or when sleeping. Always follow the safety guidelines in the product manual.

No, as an electric fire, the Warmlite Whitby does not produce any combustion by-products, smoke, or fumes. Therefore, it does not require a chimney, flue, or special ventilation. You only need to ensure the unit's built-in air vents are unobstructed for proper operation.

The power consumption depends on the heat setting selected: 1000 watts (1KW) or 2000 watts (2KW). At 2000W, it consumes 2 kilowatt-hours (kWh) per hour of operation. The flame effect alone consumes minimal power (Info needed: precise wattage for flame effect only).

The Warmlite Whitby 2KW Electric Fire comes with a 2-year warranty from the date of purchase. Please retain your proof of purchase for any warranty claims.

The product description mentions a 'modern inset style' which suggests it's designed to fit neatly against a wall or into a suitable recess. For precise installation requirements for a recessed fit, always consult the specific dimensions and installation instructions provided in your user manual.

First, ensure the unit is securely plugged into a working electrical outlet. Check if the wall socket has power by testing it with another appliance. Verify that the power switch on the unit itself (if present) is in the 'On' position and that your desired heat or flame effect settings are selected. If the issue persists, check your home's circuit breaker for a tripped switch.

This typically means the flame effect function is activated, but the heating element is not. Check that one of the two heat settings (1000W or 2000W) has been selected on the control panel. Ensure the thermostat (if applicable) is set higher than the current room temperature. If the heating still doesn't engage, ensure the air vents are not obstructed.

Ensure the fire is set to the higher 2000W power setting for maximum output. Check for any obstructions around the air inlet and outlet vents, as blocked vents can restrict airflow and reduce heating efficiency. Keep doors and windows closed in the room to prevent heat loss. Remember that electric fires are often designed for supplemental heating and may not be sufficient for heating very large or poorly insulated rooms as a primary source.