Orac Decor FDP500 DecoFix Pro - White

Orac Decor FDP500 is intended for interior use with Orac Decor mouldings on surfaces that are clean, dry, and dust-free.

While FDP500 is suitable for many interior applications, it's not ideal for consistently damp environments like bathrooms. For those areas, Orac Decor recommends using FDP700, which is designed for higher moisture exposure.

The adhesive will harden in approximately 24 hours. Full strength is achieved after complete curing.

Use a damp sponge or cloth to wipe away excess adhesive immediately after application. If the adhesive has dried, you can try gently scraping it off or sanding it once it's fully cured.

Coverage is up to 8m per cartridge, depending on the application method and surface.

Yes, it is recommended to use a cartridge gun for easy and effective application.

Yes, once the adhesive has fully dried, it is paintable, allowing you to seamlessly integrate the mouldings into your decor.

Yes, FDP500 is designed for use with Orac Decor mouldings. However, for joints, the FX400 is recommended, excluding the Basixx CB range.

Ensure both surfaces are clean and dry. Apply a sufficient amount of adhesive and hold the moulding firmly in place until it bonds. Consider the hydro FDP700 for damp areas.

Make sure you are using a proper cartridge gun. Check the nozzle for any blockage.

Remove excess adhesive immediately after application with a damp sponge or cloth. For dried adhesive, you can try gently scraping it off or sanding it after it has fully cured.