Davey Lighting's Aluminium oval bulkhead is a traditional cast aluminium utility bulkhead with eit...Davey Lighting's Aluminium oval bulkhead is a traditional cast aluminium utility bulkhead with either a black or grey hammerite paint finish and clear prismatic glass. Made here in the UK using the centuries old technique of sandcasting, the light is suitable for bathroom and exterior use thanks to its IP54 rating. The Aluminium oval bulkhead has a rear conduit entry through its backplate fixing, and is available with or without the additional protection of a wire guard.
This guide is for homeowners and property managers seeking a durable and traditional lighting solution for bathrooms and exterior spaces. The Davey Lighting Aluminium Oval Bulkhead in Grey offers robust construction and a classic aesthetic, providing reliable illumination. A key consideration is its IP54 rating, suitable for general outdoor and bathroom use but not for direct high-pressure water jets.
All features
Colour
Grey
Model Part Number
54665529622913
Brand
Davey Lighting
Extended Product Information
FAQs
What type of light bulb does this bulkhead use?
This bulkhead uses a standard E27 screw-in bulb. Please refer to the fixture's specifications for the maximum wattage allowed.
Is this light suitable for a coastal environment?
While the cast aluminium is durable, coastal environments can be harsh. The IP54 rating offers protection against dust and splashes, but prolonged exposure to salt spray may affect the finish over time. Regular cleaning is recommended.
Can I install this light indoors?
Yes, the light is suitable for indoor use, particularly in bathrooms due to its IP54 rating.
What is the difference between models with and without a wire guard?
The model with a wire guard has an additional metal cage surrounding the glass for enhanced protection against impact, making it suitable for areas where it might be accidentally struck.
Does the light come with a bulb?
No, the light fitting is supplied without a bulb. You will need to purchase a compatible E27 bulb separately.
How do I clean the prismatic glass?
Clean the glass with a soft, damp cloth. Avoid using abrasive cleaners or solvents that could damage the glass or its finish.
Is this light dimmable?
The dimmability of the light depends on the type of bulb installed. If you use a dimmable E27 bulb and are connected to a compatible dimmer switch, then the light can be dimmed.
Troubleshooting
Light does not turn on
Check that the power supply is on, the bulb is correctly screwed in and functional, and wiring connections are secure.
Flickering light
Ensure the bulb is fully seated and compatible. Check wiring connections for looseness.
Water ingress observed
Immediately turn off power. Check the integrity of the glass seal and any gaskets. Ensure the fitting is securely mounted and all entry points are sealed correctly. If damage is evident, consider replacing parts or the unit.
Paint finish showing wear
Clean the affected area and apply a compatible grey exterior paint, such as Hammerite, following paint manufacturer's instructions.
Pros and Cons
Pros
Durable cast aluminium construction for longevity.
Classic design suits traditional and contemporary settings.
IP54 rating provides good protection for wet areas and outdoors.
Made in the UK, supporting local manufacturing.
Available with or without a protective wire guard for versatility.
Cons
Hammerite paint finish may require touch-ups over time.
IP54 rating is not suitable for very exposed or high-pressure washdown areas.
Prismatic glass, while functional, may not offer the same aesthetic as clear glass for some users.
Installation may require professional assistance due to electrical wiring.
Setup, Compatibility & Care
Setup:
Ensure the power supply is switched off at the mains before installation.
Mount the bulkhead securely to the wall using appropriate fixings (not supplied).
Connect the electrical wiring through the rear conduit entry to the backplate.
Install a compatible light bulb (not supplied).
Attach the glass diffuser and secure it.
If using a wire guard, attach it according to the manufacturer's instructions.
Restore power at the mains.
Compatibility:
This fixture requires a standard E27 screw-in bulb (not supplied). Check the maximum wattage rating for the specific bulb type (e.g., LED, incandescent) before installation.
Compatible with standard household electrical wiring.
Care:
Clean the exterior with a soft, damp cloth. Avoid abrasive cleaners.
Periodically check the glass seal for integrity, especially if installed in a damp environment.
Ensure the IP54 rating is maintained by not overtightening fixings or damaging seals.