Merrell - Moab Speed 2 Mid GORE-TEX® - Boots - Grey - UK 6.5

The GORE-TEX® membrane provides waterproofing and the boots offer good insulation, but they are primarily designed for three-season use. For deep snow or extreme cold, consider a boot specifically rated for winter conditions.

There should be about a finger's width of space between your longest toe and the front of the boot when standing. Your heel should feel secure and not lift excessively when walking. Trying them on with your typical hiking socks is recommended.

No, machine washing is not recommended as it can damage the materials, adhesives, and waterproofing membrane. Always clean by hand with a brush and damp cloth.

The Moab Speed 2 incorporates more athletic trail running technology, featuring a lighter construction, increased underfoot cushioning (30% more foam), and enhanced breathability, building on the trail-tested foundation of the classic Moab line.

The GORE-TEX® membrane is inherently waterproof. Re-waterproofing treatments are typically applied to the exterior materials to maintain their ability to shed water and prevent the boot from becoming waterlogged. This can be done as needed, especially if you notice the exterior fabric absorbing water, or roughly once a season with regular use.

Merino wool or synthetic blend hiking socks are recommended. These materials offer good moisture-wicking properties, cushioning, and can help prevent blisters, complementing the features of the GORE-TEX® lining.

Ensure laces are tightened properly to prevent water ingress. Check for any damage to the GORE-TEX® membrane. If boots are soaked from inside (e.g., sweat), improve sock choice for better moisture-wicking or ensure the boots are fully dried after use.

Adjust lacing to ensure a secure fit, particularly around the heel and ankle. Ensure you are wearing appropriate hiking socks that provide grip. The heel counter is designed for a secure fit; if slipping persists, the boot size or shape may not be suitable for your foot.

Clean the outsole thoroughly to remove mud, dirt, or debris that may be clogging the lugs. The Vibram® TC5+ rubber is designed for grip, but its performance can be affected by contaminants. Ensure the trail surface is within the intended use parameters of the boot.

Ensure the boots are properly broken in. Adjust lacing technique. Consider using different hiking socks. If the issue persists, the boot's fit might not be ideal for your foot shape.