Shopping.co.uk

FloPlast Waste Pipe Bend - 40mm

FloPlast Waste Pipe Bend - 40mm

This white ABS waste bend from FloPlast is ideal for carrying waste safely and cleanly away from y...

Best current price£1.10from Professional Building Supplies

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceTrending
Professional Building Supplies£1.10Visit shop

Floplast White Solvent Weld Waste Bend Swept - 92.5 Degree X 40Mm

Visit shop
Most popularTrusted
B&Q£1.58Visit shop

B&Q - 229416 White Solvent Weld 87.5° Non-Adjustable Waste Pipe Bend (Dia)40mm

Visit shop

All Offers

11 offers from £1.10 - £8.45

View price history by clicking the chart icon.

Professional Building SuppliesFloplast White Solvent Weld Waste Bend Swept - 92.5 Degree X 40Mm
Free delivery in 1–3 days
£1.10
Visit shop
B&QB&Q - 229416 White Solvent Weld 87.5° Non-Adjustable Waste Pipe Bend (Dia)40mm
Free delivery in 1–3 days
£1.58
Visit shop
eBayFloPlast ABS Solvent Weld 92.5 Degree Bend 40mm White
Free delivery in 1–3 days
£4.87
Visit shop
OnBuy.comFloplast Abs Ws15w Solvent 92.5 Waste Bend - 40Mm 5055149902505
Free delivery in 1–3 days
£5.71
Visit shop

Product Information

Full details

This guide is for homeowners and plumbers using the FloPlast 40mm Waste Pipe Bend. It provides clear instructions on installing and maintaining the bend, ensuring efficient waste removal. While durable and effective, this bend requires solvent welding, which necessitates careful handling of solvent cement and proper ventilation. This guide covers setup, usage, and troubleshooting to help you get the most out of your FloPlast Waste Pipe Bend.

All features

Model Part Number229416
BrandFloPlast

Extended Product Information

FAQs

What is the angle of the bend?

The bend has a 92.5-degree angle, designed for efficient waste flow.

What type of connection does it use?

It uses a solvent weld connection, which creates a permanent seal.

What materials is it made of?

It is made of ABS (Acrylonitrile Butadiene Styrene) plastic.

Is it suitable for hot water?

Yes, it is suitable for typical household hot and cold water waste.

What standards does it meet?

It is manufactured to BS EN 1455 and is kitemarked.

Can I use this with other brands of pipe?

It is compatible with other brands of 40mm waste pipe, but it's best to use it with FloPlast fittings for optimal performance.

How long should I wait before testing the joint?

Allow the joint to set for 5 minutes and then wait 12 hours before testing.

What should I do if the joint leaks?

If the joint leaks, ensure you followed the correct procedure. If the leak continues, you may need to cut out the joint and redo it.

Troubleshooting

Joint leaks after installation.

Ensure the pipe was fully inserted into the fitting with solvent cement and allowed to cure for 12 hours before testing. If the leak persists, the joint may need to be cut out and redone.

Slow drainage.

Check for blockages in the pipe. Ensure the bend is installed correctly, with no obstructions.

Pros and Cons

Pros

  • Efficient waste flow due to the 92.5-degree angle.
  • Durable ABS construction ensures long-lasting performance.
  • Solvent weld connection provides a secure, leak-proof seal.
  • Manufactured to British standards, ensuring quality and reliability.

Cons

  • Requires solvent cement for installation, which can be messy.
  • Solvent welding requires proper ventilation due to fumes.
  • Joints are permanent, making adjustments difficult.
  • Installation requires some plumbing experience.

Setup, Compatibility & Care

To install the FloPlast Waste Pipe Bend, follow these steps:

  1. Preparation: Ensure the pipe and fitting surfaces are clean and free of debris.
  2. Apply Solvent Cement: Apply solvent cement to both the inside of the fitting and the outside of the pipe.
  3. Insert Pipe: Immediately push the pipe fully into the fitting with a slight twisting motion.
  4. Clean Excess: Wipe off any excess solvent cement.
  5. Setting Time: Allow the joint to set for at least 5 minutes.
  6. Curing Time: Wait 12 hours before testing the joint.

Compatibility: This bend is designed for use with 40mm waste pipes and fittings from the FloPlast range, and is suitable for solvent weld connections.

Care: Solvent weld joints are permanent and require no specific maintenance. Avoid harsh chemicals when cleaning the pipework.

Similar items

FloPlast Waste Pipe Bend - WhiteFrom £2Wavin OsmaWeld Knuckle Bend - 90 Degree - 32mm - WhiteFrom £3FloPlast Waste Pipe Bend - 40mm - 135°From £2FloPlast Waste Pipe Conversion Bend - White - 32mmFrom £2Waste Pipe Conversion Bend - 40mmFrom £2JG Speedfit MDPE Equal Tee - 25mmFrom £22Hep2O 90º Spigot Elbow - 15mm - WhiteFrom £4Hep2O 90º Spigot Elbow - 22mmFrom £6FloPlast Waste Pipe Conversion Bend - 40mm - Push-FitFrom £2Hep2O Elbow - 28mm - WhiteFrom £17JG Speedfit MDPE Equal Straight Connector - 25mm - BlueFrom £7Hep2O 90deg Elbow - 15mm - White PlasticFrom £4

Price History

DatePrice
Visit shop