FloPlast Square Gutter - 90 Degree - 114mm - White

Yes, the FloPlast 90 Degree Gutter Angle features a symmetrical design, meaning the same fitting can be used for both internal and external corners.

You must support the angle by positioning a fascia bracket within 150mm on both sides of the fitting to prevent sagging.

This gutter angle is 114mm in size and is part of the Square Line profile.

This gutter angle comes in a White finish.

Clean the exterior with a damp cloth and mild detergent. Regularly remove any debris from inside the gutter system.

No, this is a fixed 90-degree angle fitting. Different angles require different specific fittings.

This is part of the FloPlast Square Line gutter system.

Ensure fascia brackets are installed within 150mm of each side of the angle fitting. Add additional support if necessary.

Check that gutter sections are fully inserted into the angle fitting. Reapply gutter sealant if the joint is compromised or if required by installation guidelines.

Verify that the gutter system has a slight fall towards the downpipe. Check that the angle fitting is not sagging due to inadequate support.

Confirm that you are using compatible FloPlast Square Line components of the same size (114mm). Ensure no debris is obstructing the connection.