Pro-Cote Machine Spray Paint 500ml - Green

Aerosol Solutions Pro-Cote Spray Paint is suitable for most metals, wood, and rigid plastics.

The paint is quick-drying, but drying times can vary. Refer to the product label for specific drying times under various conditions.

While not always necessary, using a primer is recommended for optimal adhesion and durability, especially on bare surfaces. The paint is compatible with all conventional primers.

The surface should be clean, dry, and free from rust, loose paint, and grease. Sanding the surface lightly can improve adhesion.

Apply several thin coats, allowing each coat to dry before applying the next. This typically provides a more even and durable finish than a single thick coat.

Store the can in a cool, dry place, away from direct sunlight. After use, invert the can and spray until only propellant comes out to prevent clogging.

Clean up overspray immediately with the appropriate solvent, as recommended on the product label.

Apply thinner coats and ensure the can is held at the correct distance from the surface.

Clean the nozzle with a solvent or replace the nozzle. Ensure the can is shaken well before use.

Ensure the surface is properly prepared. Apply several thin coats instead of one thick coat.

Ensure adequate ventilation and allow sufficient drying time. Check the temperature and humidity levels in the area.