Ronseal One Coat Stays White Non Drip Paint - White - 2.5L

While the paint is touch dry in 1-2 hours, it fully cures in about 7 days. Avoid heavy contact with the painted surface during this time.

Yes, but ensure the old paint is sound and properly prepared by cleaning and lightly sanding before applying Ronseal One Coat Stays White.

Use a good quality brush or roller suitable for water-based paints to achieve the best finish.

No, this paint is designed for interior use only.

Coverage depends on the surface, but typically, 2.5L will cover approximately 30 square meters.

It is recommended to lightly sand and prime varnished surfaces before applying Ronseal One Coat Stays White.

Ensure you are not applying too much paint at once. Apply the paint in thin, even coats. If necessary, wipe off any drips immediately.

Make sure the surface is properly prepared by sanding it. Use a high-quality brush or roller. Apply an even coat.

Ensure adequate ventilation in the room. Check the temperature and humidity levels, as this can affect drying time.