Options Laminate Kitchen Upstand - Lima Stone - 3000 x 100 x 20mm

The primary purpose is to protect the wall behind your kitchen worktop from splashes, spills, grease, and general daily wear, while also providing a seamless aesthetic finish.

Clean spills immediately with a damp cloth and mild detergent. Avoid abrasive cleaners or scouring pads. Wipe dry with a soft cloth.

Yes, it can be cut to your required lengths using a fine-toothed saw. Ensure cuts are clean and smooth.

Use a good quality, flexible silicone sealant suitable for kitchen applications. Apply it along the top and bottom edges to create a watertight seal.

The laminate surface itself is water-resistant for everyday use. However, it is crucial to seal the edges with silicone to prevent water from seeping behind the upstand and into the wall or worktop.

The postformed edge is curved to create a smooth transition from the worktop to the upstand, enhancing the seamless look and helping to deflect splashes away from the wall joint.

Please refer to the retailer or manufacturer's documentation for specific warranty information, as this can vary.

Ensure the wall and worktop surfaces are clean, dry, and free from dust or grease. Use a high-quality, appropriate adhesive and ensure sufficient pressure is applied during installation. Check that sealant is applied correctly to form a strong bond.

Ensure the wall is flat and the worktop is level. Reapply adhesive if necessary and use a suitable sealant to fill any small gaps. Allow sealant to cure completely before exposing to moisture.

While scratch-resistant, deep scratches cannot be removed. Avoid dragging abrasive items across the surface. Minor scuffs can sometimes be buffed out with a non-abrasive laminate cleaner.