Best current price£7.26from Amazon
Shopping.co.uk recommended and popular offers
Amazon£7.26Visit shop Bartoline Glitter Spray Clear Sealant Green 400ml – Vibrant Green Glitter Paint for Crafts, Décor and DIY Multi-Surface Spray for Wood, Metal, Plastic, Fabric Bold Sparkling Finish Indoor and Outdoor
Visit shop5 offers from £7.26 - £11.99
View price history by clicking the chart icon.
The Bartoline Glitter Spray Clear Sealant in Green is designed for crafters and DIY enthusiasts looking to add a vibrant, shimmering green effect to various projects. Its key benefit is the easy application of a bold, sparkling finish on multiple surfaces, perfect for festive decorations or eye-catching artistic creations. A caveat to note is the requirement for good ventilation and specific temperature conditions during use.
| Colour | Green |
|---|---|
| Model Part Number | PP6918 |
| Brand | Bartoline |
The spray requires approximately 24 hours to fully harden after application.
Yes, the spray is compatible with fabrics, offering a shimmering finish for textile crafts or costumes.
While suitable for various crafts, ensure adult supervision due to the aerosol nature and ventilation requirements. Use in a well-ventilated area.
After use, always invert the can and spray for 2-5 seconds. If a blockage persists, you can try gently cleaning the nozzle with a fine pin or a suitable solvent, ensuring safety precautions are followed.
Yes, the glitter spray is designed for both indoor and outdoor use, providing a durable, shimmering finish.
The product is versatile, but avoid using it on surfaces that cannot withstand the solvent-based lacquer or where high heat is a concern. Always test on an inconspicuous area first if unsure.
It's recommended to apply several thin coats, with 15-20 minute intervals between each, until the desired coverage and glitter density are achieved.
Shake the can more vigorously for at least two minutes before and during use. Ensure the nozzle is not blocked. Try holding the can at the recommended distance (15-25cm).
Apply additional thin coats, allowing 15-20 minutes drying time between each layer, until the desired coverage is achieved.
After use, always invert the can and spray for 2-5 seconds to clear the nozzle. If a blockage occurs, try gently cleaning the nozzle with a fine pin or solvent (following safety instructions).
Ensure the surface was thoroughly cleaned and dried before application. Remove any dust, oil, or grease residues. Check that the application temperature is within the recommended range (15°C-25°C).
Preparation: Ensure the surface you intend to treat is clean, dry, and free from any dirt, dust, oil, or grease deposits. Proper surface preparation is crucial for optimal adhesion and finish.
Application: Shake the aerosol can vigorously for at least two minutes before and regularly during use. Hold the can 15-25cm away from the surface and apply several thin coats. Allow 15-20 minutes of drying time between each coat to achieve the desired coverage and finish. Avoid applying in direct sunlight.
Environment: Use only outdoors or in a well-ventilated area. The ideal temperature range for application is between 15°C and 25°C.
Post-Use: After each use, invert the can and spray for 2-5 seconds. This clears the nozzle and prevents blockages, ensuring the product is ready for future use.
Storage: Store the can in a cool, dry place, away from direct heat or sunlight.
Compatibility: This spray is compatible with a wide array of surfaces including wood, metal, ceramics, plastic, fabrics, and paper.
