Milwaukee M18 Jigsaw - M18BJS

The M18 BJS uses T-shank blades, which are standard for many jigsaws.

Use the FIXTEC™ blade clamp. Open the clamp, insert the new blade, and close the clamp to secure it.

Yes, the M18 BJS can cut steel up to 10mm thick. Ensure you use a metal-cutting blade and adjust the speed appropriately.

The stroke rate is 2700 spm (strokes per minute).

The maximum cutting depth for softwood is 135mm.

Use the keyless bevel facility located on the base of the jigsaw. Loosen the lever, adjust the base to the desired angle (0-45 degrees), and retighten the lever.

Use a damp cloth to clean the exterior of the tool. Use compressed air to clear dust and debris from the blade clamp and vents.

Yes, the soft shoe is detachable and can be replaced if worn or damaged.

Check that the M18 battery is properly inserted and charged. If the battery is installed correctly and the tool still doesn't turn on, inspect the battery contacts and the switch for any damage.

Ensure you are using the correct blade type for the material. Check that the blade is securely fastened in the clamp and that the pendulum action is set correctly for the material you are cutting. Reduce cutting speed.

Check the blade for damage or wear and replace it if necessary. Ensure the workpiece is securely clamped to prevent movement. If vibration persists, inspect the tool for any loose parts and tighten as needed.

Check the dust blower nozzle for blockages. Use compressed air to clear any obstructions. Ensure the dust blower switch is engaged.