Amtech C0100 Mini Pipe Cutter - 3-22mm

You can cut copper, brass, aluminium, and plastic pipes with diameters ranging from 3-22mm (1/8" - 7/8").

Stop turning and carefully loosen the adjustment knob. Check for obstructions or any damage to the blade or rollers. Make sure the pipe is correctly positioned. If needed, replace the blade.

Wipe the blade after each use to remove debris. Apply a light machine oil periodically to prevent rust and ensure smooth operation. Replace the blade when it becomes dull or damaged.

The Amtech C0100 Mini Pipe Cutter comes with a one-year warranty.

No, this cutter is not designed for cutting steel pipes.

Use the adjustment knob to adjust the blade's depth. Place the pipe between the blade and rollers, and tighten the knob until the blade makes contact. Gradually tighten as you rotate the cutter around the pipe.

Check if the blade is making proper contact with the pipe. Adjust the knob to increase pressure. Ensure the pipe is properly seated between the rollers. Replace the blade if it's dull.

Make sure the cutter is perpendicular to the pipe. Rotate the cutter evenly, and don't apply too much pressure at once. Check the rollers and the blade for any damage or obstructions.

Ensure the pipe is securely held between the rollers. Tighten the knob incrementally as you rotate the cutter. Ensure the blade is sharp; replace if dull.