Olympia Power Tools Planer - X20S

Use the provided hex key to loosen the screws holding the blades in place. Carefully remove the old blades and install the new ones, ensuring they are properly aligned. Tighten the screws securely.

The X20S uses a 20V 2.0Ah X20S Li-ion Battery, included with the planer.

Yes, the X20S is designed to work on various wood types, including hardwood. However, slower passes and care should be taken with very dense species.

The planing width is 82mm, and the planing depth is 1.5mm.

Use the depth adjustment knob located on the planer to set the desired planing depth before starting your work.

Included accessories: 1 x 20V 2.0Ah X20S Li-ion Battery, 1 x X20S Fast Charger, 1 x Parallel Guide, 1 x Rebate Guide, 2 x Reversible Blades, 1 x Hex Key, 1 x Spanner, and 1 x Removable Dust Bag.

Regularly inspect the blades for wear and tear. If they become dull or damaged, replace them with the correct type of replacement blades for the X20S.

Check if the battery is properly installed and charged. Make sure the on/off switch is in the 'on' position.

Check the blades for damage or dullness; replace them if necessary. Ensure the wood is clean and free of debris.

Check if the base of the planer is clean and free of obstructions. Ensure the blade is properly aligned and the depth is consistent.

Empty the dust bag frequently. Ensure the dust extraction port is not blocked.