Kenable Cable Clips - White - 12mm

These clips are designed for cables with a 12mm diameter.

Yes, they are suitable for most indoor or outdoor DIY jobs due to their tough PE clip elasticity and shock resistance.

Each pack contains 100 cable clips.

The clips are made from a tough, shock-resistant PE (Polyethylene) material.

Each clip comes with a high-impact nail attached for installation.

While they are specifically designed for 12mm cables, a slightly smaller cable might fit loosely. For larger cables, they will not fit and could be damaged if forced.

They are suitable for most common DIY surfaces like wood and plasterboard. For very hard surfaces like concrete, pre-drilling may be necessary or a different fastener might be required.

Ensure the cable is indeed 12mm in diameter. If the cable is slightly smaller, consider using a smaller clip size or adding a small piece of tape to the cable before inserting it into the clip for a tighter fit.

Check the surface; it might be too hard for the nail. Try pre-drilling a small pilot hole for the nail, or use a different fastening method if installing on concrete or very dense materials.

Avoid overtightening or excessive force when hammering the nail. Ensure the clip is not being used for cables significantly larger than 12mm, which could stress the material. Replace the damaged clip.

Re-seat the cable within the clip and ensure the clip itself is still firmly attached to the surface. If the surface is prone to expansion/contraction (e.g., wood), the nail might need reinforcing.