AB Tools M6 6mm Alu Nut Serts Riveting Nuts Rivet Threaded Inserts Blindnut Rivnut 50Pc - Silver

A nut sert, also known as a rivnut or threaded insert, is a fastener that can be installed into thin materials to create a strong internal thread. It is installed from one side, acting as a blind fastener.

These aluminum M6 nut serts are suitable for a wide range of materials including aluminum, steel, plastic, and composites, typically up to a thickness of around 3mm.

Yes, you will need a nut sert tool (rivnut tool) that is compatible with M6 threaded inserts. These tools are used to draw the mandrel and collapse the body of the nut sert into place.

Aluminum nut serts are lighter and offer excellent resistance to rust and corrosion, making them ideal for environments where moisture is present or for applications where weight is a concern. They also prevent galvanic corrosion when used with aluminum panels.

Yes, nut serts can be installed after painting or other finishing operations. This helps to prevent damage to the finish during installation and provides a robust anchor post-painting.

A blind fastener means it can be installed without requiring access to both sides of the workpiece. This is useful for hollow sections, tubes, or sealed units.

These nut serts are designed to provide strong threads with at least 6 turns, even on thinner materials, ensuring a reliable connection.

Ensure the serrations on the nut sert body are engaged with the material. The hole diameter may be too large, or the material may be too soft. Consider a larger hole or a different fastener type if this persists.

Check that you are using a compatible nut sert tool for M6 inserts and that it is properly adjusted. Ensure the tool's mandrel is fully engaging the nut sert's mandrel and that sufficient force is applied.

Verify the correct M6 nut sert is being used for the M6 screw. Ensure the nut sert was set correctly without over-collapsing, which can deform the internal threads.

Ensure the tool is fully retracted after setting the insert. Some tools may require a specific twisting motion to release the mandrel cleanly. Check the tool's manual for specific instructions.