Frenchic Wall Paint - Green

No, this paint is self-priming, meaning you can apply it directly to most prepared surfaces without a separate primer.

A 2.5l tin covers up to 35m² with a single coat. For best results, two coats are recommended, providing coverage of approximately 17.5m².

It is suitable for interior walls and ceilings, but it is not recommended for very wet areas like shower enclosures or bath surrounds due to its ultra-matte finish.

Once fully cured (7-14 days), the paint is completely scrubbable. Use a damp cloth and mild detergent. Avoid abrasive cleaners.

The paint provides an ultra-matte finish, which is a sophisticated, non-reflective surface.

Yes, it is EN71-3 certified, making it safe for use on children's toys and in environments where children will be present.

Yes, it is suitable for a wide range of surfaces including wooden furniture, kitchen cupboards, and interior woodwork.

This Wall Paint has an ultra-matte finish for walls and ceilings. The matching Trim Paint has a soft-satin finish and is designed for woodwork, doors, and frames, allowing for a coordinated look.

Ensure the surface was properly cleaned and prepared. Remove any dust, grease, or loose paint. For very glossy surfaces, a light sanding may be necessary before application.

Apply paint evenly in thin, consistent coats. Work in one direction and maintain a wet edge to avoid overlaps. Consider using a high-quality brush or roller designed for matte finishes. Ensure paint is adequately stirred.

The ultra-matte finish can sometimes make colours appear slightly darker or greyer when dry compared to when wet. Always test on a small, inconspicuous area first. Ensure sufficient light is available during application.

Ensure the paint has fully cured (7-14 days). Use a soft cloth with mild detergent and water, and avoid excessive scrubbing. Rinse the area with clean water after cleaning.