Setup, Compatibility & Care
Preparation: Ensure surfaces are clean, dry, and free from dust, grease, and flaky paint. Lightly sand glossy surfaces to improve adhesion. As the paint is self-priming, no specific primer is typically required unless dealing with highly problematic surfaces or stains.
Application: Stir the paint thoroughly before use. Apply with a good quality synthetic brush or roller. For walls and ceilings, two coats are recommended for optimal colour depth and durability. Allow sufficient drying time between coats (typically 2-4 hours, but check conditions). Ensure good ventilation during application and drying.
Compatibility: Suitable for interior walls, ceilings, primed wood, interior woodwork, wooden floors, kitchen cupboards, metal, powder-coated radiators, and interior uPVC. It is not recommended for very wet areas such as shower enclosures or bath surrounds.
Care: Once fully cured (allow several days to a week), the paint is completely scrubbable. Clean spills and marks promptly using a damp cloth and mild detergent if necessary. Avoid abrasive cleaners or scouring pads that could damage the finish.