Wavin Osma Overflow Solvent Bend - 45° - 21.5mm - White

This bend is designed for 21.5mm PVC-U solvent weld pipe.

You will need Wavin Osma solvent cement (or a suitable equivalent for PVC-U) and a clean, dry environment for installation.

The product is suitable for general overflow use. For specific high-temperature applications, consult product specifications or Wavin technical support.

No, this is a rigid solvent weld fitting designed to create a permanent, non-flexible joint.

It is used to direct overflow water safely away from cisterns, tanks, and condensing boilers.

The fittings are manufactured in ABS and the pipe in PVC-U.

While it is designed for Wavin Osma systems, it should be compatible with other PVC-U solvent weld pipes of the correct diameter, provided they meet relevant standards.

Ensure surfaces were clean and dry before applying solvent cement. Re-cut pipe if necessary and re-apply cement, ensuring a firm, immediate connection.

Check for any debris or obstructions inside the fitting socket or on the pipe end. Ensure correct pipe size is being used.

The joint may not have been held firmly during the initial set or insufficient solvent cement was used. The joint will need to be cut out and remade.