Poppy Mother And Child Floor Lamp - Antique Brass

The mother lamp requires one 230W max R7 118mm halogen linear bulb, and the child lamp requires one 33W max G9 bulb. Please note that bulbs are not included with the lamp.

You can use LED bulbs if they are specifically designed to be dimmable and are compatible with R7 or G9 sockets, respectively. However, performance may vary, and it's best to use the recommended halogen or incandescent types for optimal dimming results.

The lamp features a double rotary dimmer switch. Each control corresponds to one of the light sources (mother and child lamp), allowing you to adjust their brightness independently.

The lamp has a height of 180cm and a diameter of 29cm.

To clean, unplug the lamp and wipe gently with a soft, dry cloth. Avoid abrasive cleaners. If necessary, use a slightly damp cloth and dry immediately.

Yes, some assembly is required to connect the pole sections and install the bulbs. Please refer to the product manual for detailed instructions.

Please refer to the retailer or manufacturer's documentation for specific warranty information, as warranty periods can vary.

Ensure the lamp is securely plugged into a working power outlet. Check that both bulbs are correctly installed and are the correct wattage and type. Verify the dimmer switches are in the 'on' position.

Check the specific bulb for that light. Ensure it is screwed in properly and is not burnt out. If the bulb is new, test it in another compatible fixture if possible. Verify the dimmer control for that light is not set to the minimum.

Confirm that the installed bulbs are dimmable and compatible with the lamp's dimmer. If using non-compatible or non-dimmable bulbs, the dimmer may not work as expected. Ensure bulbs are within the specified wattage limits.

Ensure the lamp is placed on a flat, level surface. Check that all pole sections are securely tightened. If the base feels loose, inspect its connection to the pole for any obstructions or damage.