DMR V12 Pedal - Polished Silver

You'll need a pedal wrench (or a hex key for some designs) to install the pedals. A pin key is also required to adjust the pins.

Use a pin key to unscrew the old pins and screw in the new ones. Ensure they are tightened properly.

The DMR V12 pedals are compatible with most mountain bikes with standard 9/16" pedal threads.

Pin replacement frequency depends on riding style and terrain. Inspect the pins regularly for wear and tear, and replace them when necessary.

The bearings are sealed and do not require frequent maintenance. However, check for play or roughness periodically and have them serviced or replaced if needed.

Warranty information is not available in the product data.

The standard version weighs under 430g per pair.

Tighten the pedals into the crank arms using the correct torque specification. Check for bearing play and replace if necessary.

Adjust the pin height and placement to increase grip. Experiment with different pin configurations to suit your riding style.

Clean the pedals and check for debris or damage. If the bearings are rough, have them serviced or replaced.

Ensure the pedal threads are aligned correctly with the crank arms and apply grease to the threads before installation.