Rycote Full Windshield 4 Kit - Black

This kit is designed for shotgun microphones measuring 211mm-280mm in length and 19-34mm in diameter with a 3-pin XLR connector, such as the Sennheiser MKH 416, MKH 60, and Schoeps CMIT 5U.

It is not recommended. Using the kit with microphones outside the specified length and diameter may result in a poor fit, reduced performance, or potential damage to the microphone or the kit.

The Windjammer can be cleaned gently with a damp cloth. Allow it to air dry completely before reattaching it to the windshield.

Yes, the modular suspension system is engineered to significantly isolate the microphone from handling noise generated by boom poles or camera movement.

The kit comprises the Modular Suspension, the Modular Windshield, and the Windjammer.

While it offers the best wind isolation for outdoor use, it can also help reduce room echo or general ambient noise slightly indoors, though its primary purpose is wind protection.

Ensure the Windjammer is fully covering the windshield and is snug. Check that all seals are intact and that there are no gaps where wind can enter. Verify the microphone is centered within the suspension.

Confirm the microphone is correctly seated in the suspension system. Ensure the suspension bands are not over-tightened or damaged. Avoid rigid mounting of the windshield assembly.

Ensure the windshield is fully assembled and the microphone is correctly inserted. Try gently stretching the Windjammer opening before sliding it over the windshield. Avoid forcing it, which could cause damage.

Check that all parts are correctly assembled according to the setup instructions. If suspension bands are loose, they may need replacement. Ensure the microphone is securely gripped by the suspension.