Trend Mesh Sanding Disc - 150mm - 240G - 5 Pack

The open net structure allows for superior dust extraction, capturing up to 95% of dust generated during sanding. This leads to a cleaner work environment and a superior finish by preventing dust from interfering with the abrasive.

This 240-grit disc is ideal for finishing tasks on resinous timbers, fillers, paints, and other heat-sensitive materials. It provides a fine finish ready for subsequent coatings.

The anti-clog technology uses a special stearate release agent on the grit. This agent helps to reduce heat build-up and minimizes the adhesion of dust and debris to the abrasive surface, preventing clogging.

No, these discs feature universal fitment, meaning there's no need to align extraction holes. The open net structure ensures dust is captured regardless of hole alignment.

The lifespan of the disc depends on the material being sanded and the amount of pressure applied. You should change the disc when you notice a significant decrease in its cutting ability or when it becomes heavily clogged and cannot be cleaned effectively.

The 240-grit is a fine grit intended for finishing. For rough sanding or initial material removal, a coarser grit disc (e.g., 80G or 120G) would be more appropriate.

Mesh discs offer superior dust extraction and are generally more durable and resistant to clogging, especially on softer or resinous materials. Traditional paper discs can be more cost-effective for general-purpose sanding but offer less efficient dust extraction.

Ensure the hook and loop surfaces on both the disc and the sander pad are clean and free from dust and debris. Press firmly to ensure a secure attachment.

Verify that your vacuum or dust extraction system is properly connected and functioning. Check that the disc's open net structure is not excessively clogged with dust.

This can occur with very soft or gummy materials. Ensure you are using the correct grit for the material and task. Try reducing sanding pressure slightly or cleaning the disc more frequently.

Ensure you are not applying excessive pressure. For resinous materials, the anti-clog technology helps, but extreme cases may still lead to faster wear. Clean the disc regularly.