Lawn Edging Set - Steel - 5m x 8cm - Anthracite

The lawn edging is made from galvanised steel, providing durability and resistance to rust.

This set includes 5 pieces of lawn edging.

The total length of the set is 5 meters, and each piece has an 8cm height from the top of the edging to the tip of the spikes.

While the steel is flexible enough for curves, very sharp 90-degree corners are difficult to achieve without crimping the material. Gentle curves are best suited for this product.

No assembly is required. The pieces are designed to be connected directly and tapped into the ground.

You will need a hammer or rubber mallet to tap the spikes into the ground. Pliers may be helpful for securing the dual locking mechanism for a tighter fit.

The set consists of 5 pieces, and the total coverage length depends on how they are joined together. The product description indicates a total length of 5 meters for the set.

Slightly loosen the soil with a trowel or garden fork before tapping the spikes in. If the soil is very rocky, consider an alternative installation method or pre-drilling.

Ensure the locking mechanisms on both pieces are properly aligned. Use pliers to gently squeeze the locking tabs together for a tighter fit.

Ensure spikes are driven vertically and fully into the ground. For curves, make gradual adjustments to avoid stressing the material. Reinforce the internal side of sharp curves with additional soil support if needed.

Minor scratches can sometimes be buffed out with a soft cloth. For significant damage, touch-up paint suitable for metal may be an option, though it may not perfectly match the original finish.