GRP Roofing Simulated Lead Flashing - C100C

This product is specifically designed for installation into brickwork chases; it is not recommended for other wall types.

While the finish is designed to be permanent, it can be painted with high-quality masonry or GRP-compatible exterior paint if a color match is required.

You will need an angle grinder for cutting the chase, a sealant gun for the adhesive, and standard measuring tools.

No, you must use the specified PUADHESIVE to ensure a long-lasting, weather-tight bond to the GRP material.

Please refer to the specific batch packaging, but standard lengths are typically provided in 3-meter sections.

Because it is a simulated product, check local building regulations or conservation officer requirements before use on historical properties.

Ensure the chase is at least 25mm deep and clear of mortar debris that might prevent a full seat.

Check that the PUADHESIVE was applied as a continuous, gap-free bead and that no voids exist.

Verify that the D260 angle fillet is correctly seated and that the masonry chase width matches the flashing thickness.