Best current price£9.99from Robert Dyas
Shopping.co.uk recommended and popular offers
Robert Dyas£9.99Visit shop Trendi Switch 4 Gang Light Switch - Moss Green
Visit shop
B&Q£11.95Visit shop B&Q - Trendi 4 Gang 2 Way Artistic Modern Glossy 10 Amp Rocker Tactile Light Switch Moss Green
Visit shop10 offers from £9.99 - £11.95
View price history by clicking the chart icon.
The Trendi Switch 4 Gang 2 Way Rocker Light Switch in green is designed for homeowners and DIY enthusiasts looking to elevate their interior aesthetics with a modern, screwless finish. This switch provides versatile multi-point lighting control for up to four circuits, making it an excellent choice for large living spaces or rooms with multiple entry points. While its minimalist design offers a sophisticated look and reduced dust accumulation, users should ensure they have at least a 25mm deep back box installed to accommodate the unit’s internal hardware.
| Colour | Green |
|---|---|
| Model Part Number | ART-SS8DG |
| Brand | Trendi Switch |
This is a standard 2-way rocker switch, which typically operates on the live/switched-live circuit. Please consult your local wiring diagrams or a professional electrician for your specific home setup.
This specific model is an on/off rocker switch and does not feature built-in dimming functionality. You would need a separate dimmer module if you require light level control.
The switch is rated for 10A operation at 220-250V AC.
Yes, the screwless faceplate is designed to be removed carefully to access the mounting screws underneath.
Yes, it is designed to fit standard 88 x 88mm back boxes, provided they are at least 25mm deep.
Check that the mounting screws on the back box are fully tightened and that the wiring is not bunched up behind the module preventing it from seating correctly.
Ensure that the total wattage of the lighting circuit does not exceed the 10A rating and verify that all wire connections are tight within the terminals.
Inspect the wiring to that specific gang to ensure it is correctly seated in the terminal and has not come loose during installation.
Installation Requirements:
This switch is designed to fit standard UK wall back boxes. Please ensure your wall cavity is at least 25mm deep. If you are replacing an older, larger plate, check that the existing plasterwork is clean and flat to ensure the screwless plate sits flush against the wall.
Safety Note:
Always isolate the power supply at the consumer unit before attempting to install or replace any electrical switch. If you are not familiar with electrical wiring, consult a qualified electrician.
Maintenance:
Because of the smooth, screwless finish, maintenance is straightforward. Simply wipe the surface with a soft, dry microfiber cloth. Avoid using harsh chemical cleaners or abrasive scouring pads, as these may scratch the finish of the switch faceplate.
