Wiha Industrial Cable Cutter - 180mm

This tool is VDE certified for safe operation on live parts up to 1,000 Volts AC.

This cutter is designed for copper and aluminum cables. It is not suitable for cutting steel wire or conductors with hard coatings.

It means the tool is designed to cut through cables cleanly without deforming or crushing the conductors, ensuring a precise cut every time.

Yes, this cable cutter has integrated functions suitable for stripping duties.

The cable cutter has a length of 180mm, which is designed for comfortable handling.

Wipe clean with a dry cloth after use, store in a dry place, and lubricate the pivot joint occasionally. Inspect regularly for damage.

The VDE certification applies to safe operation on live parts up to 1,000V AC. While it can cut cables on DC circuits, its specific safety rating is for AC live work.

Ensure the cable is correctly positioned within the blades and that you are applying firm, even pressure. Verify that the cable material is copper or aluminum and not steel or a hard-coated conductor.

Check that the correct stripping notch is being used for the cable's insulation thickness. Ensure the blades are clean and sharp. If dull, professional sharpening may be required.

Clean any debris from the pivot joint and apply a small amount of light machine oil. Work the handles back and forth to distribute the lubricant.