Monument Automatic Copper Pipe Cutters 8-22mm Capacity - Monument - 300M

The Monument Automatic Copper Pipe Cutter can handle copper pipes and thicker-walled plastic pipes, typically those used in central heating systems, with diameters between 8-22mm.

For soft copper, you can use the tool as a conventional cutter by feeding the wheel into the tube.

If you are cutting thin-walled plastic pipes, use an internal support to prevent the pipe from collapsing during the cutting process.

The replacement wheel number is MON301.

Keep the cutter clean and free of debris. Ensure that the moving parts are lubricated for smooth operation.

The pipe should fit snugly in the cutter. If it is too loose, the cut will not be clean. If it is too tight, it can crush the pipe.

This tool is ideal for confined spaces such as under sinks or in areas where maneuverability is limited.

Ensure the pipe size is within the 8-22mm range, and that the cutter is properly tightened. Check for any obstructions preventing the cutting wheel from contacting the pipe.

Make sure you are not over tightening the tool. When cutting soft copper, operate as a conventional cutter by feeding the wheel into the tube. For thin-walled plastic pipes, provide internal support.

Check for debris preventing the wheel's movement. Clean the cutting wheel and ensure it can rotate freely. If the wheel is damaged, replace it.