Fine Decor Wild Meadow Wallpaper - Red

Use a wallpaper adhesive specifically designed for non-woven wallpapers. These are often 'paste the wall' adhesives.

Measure the height and width of the wall, calculate the area, and consider the pattern repeat to determine the number of rolls needed.

While the wallpaper is suitable for most interior spaces, avoid areas with excessive moisture or direct water exposure.

Non-woven wallpaper is generally easier to remove. Typically, you can peel it away from the wall when dry, and any remaining adhesive can be removed with warm water.

The pattern repeat is 53 cm. This means the pattern repeats every 53 centimeters horizontally.

'Paste the wall' means you apply the adhesive directly to the wall instead of the back of the wallpaper.

Use a smoothing tool or a clean sponge to gently press the wallpaper against the wall, working from the center to the edges to remove any air bubbles.

Ensure the wall is properly prepared (clean, dry, and smooth). Use a suitable wallpaper adhesive, and make sure to apply enough adhesive to the wall.

Use a smoothing tool to push the air bubbles out towards the edges of the wallpaper. If the bubbles persist, carefully lift the wallpaper and reapply.

Double-check the pattern repeat and ensure that each strip is properly aligned before applying it to the wall. Adjust the position of the wallpaper until the pattern aligns.

Ensure edges are firmly adhered to the wall. Use a small amount of adhesive to re-secure the edges, then smooth them with a smoothing tool.