Wagner Control Pro 150 M Airless Paint Sprayer - 350W

You can use water-based paints and solvent-containing lacquers and glazes. Avoid textured masonry paint.

Follow the cleaning instructions in the user manual. Rinse with appropriate solvent based on the paint type and ensure all paint is removed.

The Control Pro 311 tip is for thinner materials, while the Control Pro 515 tip is for thicker materials, like emulsion.

Fill the tank with paint, and follow the priming procedure outlined in the user manual to remove air from the system.

The maximum spraying pressure is 110 bar.

The air hose length is 7.5m.

The Control Pro 150 M is designed for medium to large DIY projects and home use. For commercial projects, consider a more heavy-duty model.

Check the power connection and ensure the outlet is working. Verify the power switch is in the 'on' position.

Check for clogs in the spray tip or filter. Clean or replace as needed. Ensure the paint viscosity is correct for the tip being used.

Ensure the correct spray tip is being used for the paint type. Adjust the pressure settings if possible. Maintain the correct distance and angle from the surface.

Maintain a consistent spray pattern and overlap each pass slightly. Ensure the paint is properly mixed and the sprayer is primed correctly.