HOMCOM Free Standing Bio Ethanol Fireplace Heater - Black

This fireplace uses only bio ethanol fuel. It is crucial to use high-quality bio ethanol specifically designed for fireplaces to ensure a clean burn and optimal performance.

The `0.9L` burner capacity provides approximately three hours of continuous burn time per full tank, depending on factors like ventilation and room conditions.

No chimney is required as it burns cleanly without smoke or ashes. However, good ventilation in the room is always recommended when any open flame is present, especially in smaller spaces.

It provides supplemental heat suitable for an area of 20-25m². It is designed to enhance ambiance and provide additional warmth, not to be a primary heating source for a home.

Yes, the HOMCOM Free Standing Bio Ethanol Fireplace Heater requires assembly. All necessary hardware and instructions are included in the package.

Allow the unit to cool completely. Use a soft, damp cloth to wipe down the metal surfaces. Avoid abrasive cleaners. Ensure the burner is clean and dry before refilling with fuel.

The product description specifies it's for 'bedrooms, living spaces, or home offices,' implying indoor use. Outdoor use is not explicitly supported and may be affected by wind or other elements. Always refer to the user manual for specific outdoor usage guidelines. > Info needed: Clarify explicit outdoor use.

The dimensions are 50cm H x 40cm L x 30cm W, making it a compact and versatile freestanding unit.

Ensure you have enough bio ethanol fuel in the burner. Check if the fuel is high-quality and specifically for bio ethanol fireplaces. Keep away from drafts which can extinguish the flame.

Ensure you are using high-quality bio ethanol fuel. Poor quality fuel can sometimes cause odors. Also, ensure the room is well-ventilated during operation. A faint odor might be present during the first few uses as manufacturing residues burn off.

Check the fuel level; a low fuel level can result in a smaller flame. Ensure the burner opening is not partially obstructed. Drafts can also affect flame size.

Verify that the fireplace is placed on a completely flat and level surface. Re-check all assembly points to ensure screws and connections are tight and secure according to the instructions.

Over time, direct heat can cause slight discoloration, which is normal for metal products exposed to high temperatures. Ensure you are using the correct fuel and maintaining proper clearance. Clean regularly with a soft cloth.