Simoniz Grey Plastic Primer Spray 500ml - Grey

This primer is suitable for all plastic surfaces, including fibreglass and polystyrene.

Clean the surface thoroughly to remove dirt, grease, and any loose paint. Lightly sand the surface if needed.

Apply thin, even coats. Multiple coats may be necessary for complete coverage, allowing each coat to dry before the next.

It provides a matt finish.

This primer is specifically designed for plastic surfaces; using it on metal may not provide optimal results.

Refer to the product label for the recommended drying time before applying the topcoat.

Store the can in a cool, dry place away from direct sunlight and heat sources. Ensure the lid is securely closed.

Ensure the surface is thoroughly cleaned and degreased before application. Lightly sand the surface if necessary to improve adhesion.

Invert the can and spray for a few seconds after each use. If clogged, clean the nozzle with a solvent suitable for the paint type.

Apply the primer in thin, even coats. Avoid applying too much paint in one go.