Mirror Effect Spray - Cadence - Silver

Apply the spray on the *reverse* side of the glass, the side you won't see directly after it's applied.

The spray typically dries within approximately one minute, but drying times may vary depending on environmental conditions.

No, this spray is designed specifically for use on glass surfaces. Using it on plastic is not recommended and may result in poor adhesion.

Gently wipe the surface with a soft, slightly damp cloth to remove dust or smudges. Avoid using harsh chemicals or abrasive cleaners.

If the nozzle clogs, try cleaning it with a pin or needle. If the problem persists, try replacing the nozzle.

The mirrored finish is relatively durable, but care should be taken to avoid scratches or damage.

The product comes in a 150ml can.

Ensure the glass surface is thoroughly cleaned before application. Apply the spray in thin, even coats, avoiding over-application. Multiple thin coats are better than one thick coat.

Hold the can the correct distance from the glass. Apply in short bursts instead of a continuous spray. Allow each coat to dry before applying the next.

Make sure you are applying to the *reverse* side of the glass. Ensure adequate coverage during application. If necessary, apply a second thin coat after the first has dried completely.