Bosch Series 2 Induction Hob - Black

Induction technology uses electromagnetic fields to directly heat the cookware, rather than the hob surface. This results in faster cooking times, greater energy efficiency, and a cooler, safer hob surface.

No, this Bosch Series 2 Induction Hob features a Plug & Play design. It comes with a standard UK 3-pin plug, allowing for easy installation into an existing 13-amp wall socket without requiring an electrician to modify your wiring.

You need induction-compatible cookware, which means pots and pans with a magnetic base. You can test your existing cookware by holding a magnet to the bottom; if it sticks, it's suitable for use on an induction hob.

PowerBoost provides an additional burst of power to a selected cooking zone, significantly speeding up the heating process. It's ideal for boiling large quantities of water or quickly bringing liquids to temperature.

The hob features four cooking zones: front left 145 mm (1.4 KW), rear left 180 mm (1.8 KW, max 3.1 KW with PowerBoost), rear right 145 mm (1.4 KW), and front right 180 mm (1.8 KW).

This is due to the hob's automatic power management system, which is designed to limit the total power output to 3.7 KW, as it's connected via a standard 13-amp plug. When multiple zones are operating at high settings, the system will balance the power across them to prevent exceeding the limit.

Allow the hob to cool down, then wipe the ceramic glass surface with a soft, damp cloth and a small amount of mild dish soap. For dried-on food, use a specialized ceramic hob cleaner and a hob scraper. Avoid abrasive cleaners or scouring pads.

Ensure the hob is correctly plugged into a working UK 3-pin socket. Check if the main on/off switch has been pressed. Verify that the control panel lock is not active; press and hold the lock symbol to deactivate it.

Confirm that you are using induction-compatible cookware (with a magnetic base). The pan must be centered on the cooking zone. If the pan is too small for the zone, the hob may not detect it.

This is a normal function of the 3.7 KW Plug & Play system to prevent overloading the circuit. If you are using multiple high-power zones simultaneously, the hob will automatically balance the power. To maintain higher power on specific zones, consider reducing the power setting on other active zones or cooking in stages.

Ensure the PowerBoost function is activated for rapid heating (only available on the rear left zone). Confirm the cookware is induction-compatible and has a flat, clean base for optimal contact. Also, check that the pan size matches the cooking zone.

Consult the full user manual for specific error code meanings. Often, turning the hob off at the main switch for a minute and then back on can reset minor errors. If the issue persists, contact customer support.