Johnstone's Trade Acrylic Satin Brilliant White 5L

Yes, it is suitable for metal surfaces, including radiators, provided they are properly primed and prepared.

It is quick drying. Touch dry in approximately 1-2 hours and recoatable after 4 hours, depending on conditions.

Clean all brushes, rollers, and equipment with water immediately after use. If paint has dried, solvents may be required.

While it is durable, for very high moisture areas or direct water contact, a specialist bathroom paint might be more appropriate. However, it can be used in bathrooms with good ventilation.

Yes, provided the surface is cleaned, lightly abraded (sanded) to provide a key, and free from contaminants. A primer might also be beneficial.

The paint is formulated to be non-yellowing, meaning it should retain its brilliant white appearance over time and resist discoloration.

Coverage is approximately 10-12 square meters per litre, but this can vary depending on the surface porosity and application method.

Ensure the surface was properly cleaned, dried, and prepared. Re-prime or sand the surface if necessary. Check for incompatible existing finishes.

Use a higher quality brush or roller. Apply thinner coats and maintain a wet edge. Avoid overworking the paint. Ensure paint is stirred adequately.

Work in smaller sections. Maintain a wet edge between applications. Consider using an additive designed to extend drying time if working in very warm conditions.

Stir the paint thoroughly. Apply a second coat if the first was too thin. Ensure uniform application technique across the entire surface.

Ensure consistent application. Avoid touching up areas after the paint has started to dry. Re-coat the affected area ensuring an even finish.