Polycell Plaster Repair - Ready Mixed - 2.5 L

Polycell Plaster Repair is designed for interior plaster repairs only. It is not formulated for exterior applications.

Yes, once the Polycell Plaster Repair is completely dry, it can be sanded smooth and then painted or decorated to match the surrounding surface.

Drying time can vary depending on the thickness of the application and ambient conditions (temperature and humidity). Generally, it will be touch dry within a few hours, but allow for longer drying times before sanding or painting, especially for thicker applications.

For very deep holes, it is recommended to apply the Polycell Plaster Repair in multiple thin layers, allowing each layer to dry before applying the next. This prevents excessive shrinkage and cracking.

When stored correctly in a tightly sealed container in a cool, dry place away from frost, the product typically has a long shelf life. However, once opened, it is best to use it within a reasonable timeframe to ensure optimal performance.

No, Polycell Plaster Repair is a ready-mixed formulation. It is designed to be used straight from the container without any additional mixing.

Ensure the container has been properly sealed. If the product has started to dry, it may be difficult to work with. Try adding a tiny amount of water and mixing thoroughly if the product is only slightly stiff, but avoid adding too much as it can affect performance.

This can occur if applied too thickly in a single layer. For deeper repairs, apply the filler in thin layers, allowing each layer to dry before applying the next. Ensure the underlying plaster is sound and free from loose debris.

Ensure the plaster surface is clean, dry, and free from dust, grease, and loose paint. For best adhesion, lightly score the surface of very smooth plaster if necessary.

If the product has dried out completely, it cannot be rehydrated and will need to be replaced. Ensure the lid is always tightly sealed after use.