Unbranded Victorian Straight Door Handles - Silver Zinc

No, these Unbranded Victorian Straight Door Handles are specifically designed and certified for interior use only. They are not intended for external applications where they would be exposed to outdoor elements.

You will primarily need a screwdriver to install these handles. A tape measure might be useful to confirm your door thickness. All necessary fixing screws and the spindle are included in the pack.

Info needed: [Warranty information not provided in product data. Please refer to retailer or manufacturer for specific warranty details.]

These handles are designed to fit internal doors between 30mm and 45mm in thickness. If your door falls within this range, they should fit. The short backplate (106 x 42mm) might not cover holes from larger existing hardware.

To clean, simply wipe the handles with a soft, damp cloth. For any more stubborn marks, a mild soap solution can be used, followed by thoroughly wiping with a clean, dry cloth to prevent water spots. Avoid abrasive cleaners or harsh chemicals.

Yes, this product includes the door handles, spindle, and fixings, but not the latch mechanism itself. These handles are designed to match the range of tubular latches, which are typically purchased separately.

No, straight door handles are generally non-handed, meaning they can be installed on either the left or right side of a door, as they operate identically in both orientations.

Ensure all four fixing screws are securely tightened. Check the spindle for any play and confirm it's correctly seated within the latch mechanism and both handles.

Verify that the 8mm spindle is not overtightened or binding against the door or latch. Ensure the latch mechanism itself is functioning smoothly and lubricate if necessary. Also, check for any obstruction between the backplate and the door surface.

This often indicates an issue with the latch mechanism itself or the spindle's engagement. Ensure the spindle is correctly aligned with the latch and that the latch is functioning freely. The handles are designed to match tubular latches, so ensure yours is appropriate.

While rust and tarnish resistant, the satin finish can still be marked by sharp objects or abrasive cleaning. Use only soft cloths for cleaning and avoid direct contact with metal tools during installation.