Bosch Metal Drill Bit - 2mm

The PointTeQ tip is self-centring, which prevents the drill bit from wandering when starting a hole. This leads to quicker, more accurate starts and reduces the risk of the bit slipping.

This drill bit is suitable for drilling into alloyed and non-alloyed steel, non-ferrous metals, cast steel, cast iron, and plastics.

The black-oxide coating on the flute helps with rapid chip removal. This keeps the drilling process efficient and reduces the build-up of material, contributing to cooler drilling.

While it might technically cut wood, this drill bit is specifically designed for metal and plastics. For wood, a wood-specific drill bit would provide better performance and results.

To extend its life, keep the bit clean and dry, use appropriate drilling speeds, apply steady pressure, and consider using a cutting fluid or lubricant, especially when drilling harder metals. Avoid bending the bit during use.

HSS stands for High-Speed Steel, a type of steel alloyed with tungsten, molybdenum, and chromium, known for its hardness, resistance to heat, and durability, making it ideal for drill bits.

Yes, this drill bit is compatible with all standard corded and cordless drills that have a chuck capable of securely holding a 2mm shank.

Ensure the PointTeQ tip is properly seated and apply firm, consistent pressure. For very hard surfaces, consider using a center punch to create a starting indentation.

Check if the drill speed is too high for the material. Reduce speed and consider using a cutting fluid or lubricant. Ensure the flute is clear of debris for efficient chip removal.

This typically occurs due to excessive force, bending the bit, or drilling at too high a speed. Ensure consistent pressure, keep the bit straight, and use appropriate speeds for the material.

Ensure the bit is sharp and free from damage. Reduce drilling speed slightly and ensure the flute is clear for proper chip evacuation.