Godox X3 Transmitter - Canon

The Godox X3 Transmitter for Canon is specifically designed for Canon EOS cameras that have a standard hotshoe mount.

The X3 features a built-in lithium battery and can be charged using the USB-C port. A full charge from 0% takes approximately 2 hours.

The X3 is designed to work with Godox flashes that are part of the 2.4GHz Wireless X system. It is not compatible with flashes from other manufacturers.

TCM stands for TTL-Manual conversion. It allows you to instantly convert the current TTL exposure settings to manual mode parameters, or vice versa, with a simple operation on the transmitter.

Yes, the Godox X3 Transmitter supports High-Speed Sync (HSS), as well as front curtain sync and rear curtain sync.

The X3 features spare channel scanning. This function helps identify and utilize channels that are not being used by other nearby wireless systems, minimizing interference.

The Godox X3 Transmitter comes with a 2-year warranty period.

Ensure the built-in battery is charged. Connect the USB-C cable to a power source and check the charging indicator.

Verify that both the transmitter and flashes are powered on and within range. Check that they are set to the same channel and ID. Ensure the correct camera model compatibility is met.

Utilize the spare channel scanning feature on the X3 to find a less congested frequency. Move closer to the flashes or reposition the transmitter/flashes to minimize obstructions.

Try locking and unlocking the screen. If the issue persists, perform a soft reset if available, or ensure the screen is clean and dry. Contact support if the problem continues.