Beko Condenser Tumble Dryer - 8kg - White - B Rated

A condenser tumble dryer dries clothes by heating air, which then passes through the drum. The moist, warm air is then cooled down in a condenser unit, which converts the steam back into water. This water is collected in a tank or drained away, and the now-dry air is reheated and recirculated. Unlike vented dryers, it doesn't need an external vent.

Sensor drying technology uses moisture sensors inside the drum to detect the humidity level of your laundry. Once your clothes reach the pre-selected dryness level (e.g., 'cupboard dry' or 'iron dry'), the dryer automatically stops the cycle. This prevents over-drying, which can damage fabrics and waste energy.

Yes, for delicate items, it's recommended to use a specific 'delicates' or 'low heat' programme if available, or one of the timed programmes with a shorter duration and lower heat setting. Always check garment care labels before tumble drying.

You should clean the lint filter after *every* drying cycle. This is crucial for maintaining drying efficiency, preventing potential fire hazards, and ensuring the longevity of your appliance.

The 'B' energy efficiency rating indicates that this dryer is moderately energy-efficient. While it performs well, it consumes more energy than appliances with an 'A' rating. To optimize energy usage, always clean the lint filter, avoid overloading, and utilize the sensor drying programmes.

Info needed: Please consult your product manual for specific information regarding door reversibility. Some Beko models offer this feature, while others do not.

Locate the drain outlet at the back-bottom of the dryer (refer to your manual for exact location). Connect one end of the supplied drain hose securely to this outlet. Route the other end of the hose to a suitable household drain pipe, sink trap, or standpipe, ensuring it is securely fastened and has a continuous downward slope to prevent kinks or blockages.

Ensure the lint filter is clean. Check if the load size is too large or if the items are very bulky. The condenser unit might need cleaning. Also, ensure the chosen programme is appropriate for the fabric type and desired dryness level. If using sensor drying, ensure sensors are not obstructed.

Check if the dryer is properly plugged into a live electrical outlet. Ensure the door is fully closed and latched. Verify that a programme has been selected and the start button has been pressed. Check if the child lock is activated.

Ensure the direct drain hose is correctly installed and securely connected to both the dryer and the household drain. Check the hose for any kinks or blockages that might prevent water flow. The household drain connection itself might be blocked.

Avoid overloading the dryer. Remove laundry promptly at the end of the cycle or utilize the automatic anti-creasing function. Select a programme suitable for delicate fabrics if applicable. Consider using dryer balls to help separate clothes.

Ensure the dryer is placed on a firm, level surface and that its feet are properly adjusted to level the appliance. Check if any small items (like coins or buttons) have fallen into the drum and are causing noise. If the noise persists, contact customer support.