Hotpoint Washing Machine - 9kg - White

Simply load your stained items into the drum and select the Anti-stain program. This cycle is effective on common everyday stains at 40°C and generally doesn't require pre-treatment. Avoid overloading to ensure optimal results.

The Anti-allergy cycle is designed to remove major allergens like pollen and dust mites from your clothes. It uses higher temperatures and additional rinsing stages, making it ideal for households with allergy sufferers or sensitive skin.

It's recommended to clean the detergent dispenser monthly to prevent residue buildup and mold. The pump filter should be checked and cleaned every few months, or more often if you notice drainage issues or frequent error codes.

Yes, with its 9kg capacity, this washing machine is suitable for washing larger items like duvets or blankets. Ensure the item fits comfortably in the drum without overstuffing and select an appropriate cycle, such as 'Duvet' or 'Bulky Items' if available, or a gentle cycle with lower spin.

You can use either liquid or powder detergent. Always refer to the detergent manufacturer's instructions for dosage, and adjust based on load size and water hardness in your area. For best results with specialized cycles, use high-quality detergents.

The washing machine requires a standard 220-240V, 50Hz electrical supply with a grounded outlet. Ensure your home's electrical system can support the appliance.

The full user manual typically comes with your appliance. If you need a digital copy, you can usually download it from the Hotpoint official website by searching for your product's model number (MPN: 869991690820).

Check that the power cord is securely plugged into a working outlet. Ensure the machine door is fully closed and latched. Verify that the water supply taps are open and that a cycle has been correctly selected.

Ensure you are not overloading the machine, which can prevent proper water circulation. Use the correct amount and type of detergent. For stubborn stains, use the dedicated Anti-stain cycle. Check that the correct wash program was selected for the fabric type and soil level.

Verify that the washing machine is perfectly level. Adjust the leveling feet if necessary. Ensure that the transit bolts (shipping bolts) have been completely removed from the rear of the machine during installation. Check for unbalanced loads inside the drum; redistribute clothes if needed.

Check if the drain hose is kinked or blocked. Ensure the drain hose is not inserted too far into the standpipe. Clean the pump filter, located at the bottom front of the machine, as it may be clogged with lint or small objects.

Consult your user manual for specific error code explanations and troubleshooting steps. Often, turning the machine off and on again (power cycling) can reset minor errors.