Frenchic Trim Paint - Brown

Frenchic Trim Paint is formulated to be self-priming and self-sealing. For most interior surfaces, no additional primer or top coat is needed. However, on very glossy, slick, or problematic surfaces, a primer might improve adhesion and durability.

Touch dry in approximately 20-30 minutes. Recoatable after 2-4 hours, depending on ambient temperature and humidity. Full cure takes approximately 7 days.

It's suitable for interior woodwork, trims, skirting boards, doors, powder-coated radiators, metal, and various furniture items, including those made of laminate.

Yes, this paint is EN71-3 certified, meaning it's safe for use on items that children may come into contact with, including toys.

Once fully cured, painted surfaces can be cleaned gently with a soft, damp cloth. Avoid using abrasive cleaners or strong detergents.

A 500ml tin covers approximately 7m² with a single coat. For a more durable finish with two coats, coverage is approximately 3.5m².

The paint provides a soft-satin sheen, offering a smooth, subtle lustre rather than a high gloss or a flat matte finish.

Stir the paint thoroughly. If still too thick, a very small amount of water (less than 10%) can be added to aid application, but this may slightly affect the finish.

Apply thinner coats. Ensure you are using a good quality brush suitable for water-based paints and maintain a consistent brushing direction. Allow proper drying time between coats.

Ensure the surface was properly prepared and free from dust, grease, or loose paint. For very glossy or non-porous surfaces, consider a light sanding or a compatible primer before applying Frenchic Trim Paint.

Ensure adequate ventilation in the drying area. Check that the ambient temperature is not too cold or humid, as this can slow curing. Avoid applying excessively thick coats.