Fischer Hammerfix Screws - White - 050358

Name: Fischer Hammerfix Screws - White - 050358
Brand: Fischer
SKU: ascghxzgdd
Price: 34.12 GBP
Availability: InStock

The Fischer Hammerfix N-S with a countersunk head is made of a high-quality nylon plug and a zinc-...

Best current price£34.12from Blueperry agriculture (UK)

Colour

Green Grey Multicolor Silver White

Best offers

Shopping.co.uk recommended and popular offers

Lowest priceMost popular

Blueperry agriculture (UK)£34.12Visit shop

Fischer Hammerfix N8x80/40 S Galvanised 50X 50358

Visit shop

One Offer

1 offer from £34.12

View price history by clicking the chart icon.

Blueperry agriculture (UK)Fischer Hammerfix N8x80/40 S Galvanised 50X 50358

Free delivery in 1–3 days

£34.12

Visit shop

Product Information

Full details

The Fischer Hammerfix N-S with a countersunk head is designed for professionals and DIY enthusiasts needing a fast and reliable fixing solution for timber constructions in internal areas. Its key benefit is the rapid hammerset installation, saving you valuable time on the job. Keep in mind that this product is best suited for use in internal areas and with timber constructions. This guide will help you understand the features, setup, and best practices for using the Fischer Hammerfix N-S effectively.

All features

Colour	White
Model Part Number	050358
Brand	Fischer

Extended Product Information

FAQs

What materials can I use the Fischer Hammerfix N-S with?

The Fischer Hammerfix N-S is suitable for use in concrete, brick, solid block, and other common building materials in internal areas. It's designed specifically for timber constructions.

What is the correct drill bit size?

You need an 8 mm drill bit.

Can I remove the Fischer Hammerfix N-S?

Yes, the nail screw can be removed using a screwdriver, allowing for dismantling.

Is the Fischer Hammerfix N-S suitable for outdoor use?

No, it is designed for internal areas only.

What is the maximum fixture thickness?

The maximum fixture thickness is 4 cm.

What is the screw drive size?

The screw drive size is PZ3 (Pozidriv).

How many pieces come in a pack?

Each pack contains 50 pieces.

What is the length of the anchor?

The anchor length is 80 mm.

Troubleshooting

The fixing sleeve is not expanding properly.

Ensure the drill hole is the correct diameter (8 mm) and that it's clean. Check for any obstructions preventing the expansion of the sleeve.

The nail screw spins and does not tighten.

Ensure the screw is aligned correctly, and the hole is not stripped. If needed, remove the fixing and try again with a new one.

The fixing is not flush with the surface.

Check that the countersunk head is fully driven in. If not, tap gently with a hammer until it is flush. Ensure the hole is deep enough.

Pros and Cons

Pros

Fast installation saves time and increases productivity.
Suitable for various building materials in internal areas.
The countersunk head provides a clean finish.
The design allows for dismantling if necessary.
Integrated hammer-in stop prevents premature expansion.

Cons

Only suitable for internal areas.
Designed primarily for timber constructions.
May not be suitable for heavy-duty applications.
Specific drill hole diameter required (8 mm).

Setup, Compatibility & Care

Preparation: Drill a hole with an 8 mm drill bit to a depth of at least 9.5 cm. Ensure the hole is clean and free of debris.
Insertion: Insert the Fischer Hammerfix N-S through the timber component and into the pre-drilled hole.
Hammering: Use a hammer to drive the nail screw until the head sits flush with the surface.
Compatibility: The Fischer Hammerfix N-S is compatible with a wide range of building materials, including concrete, brick, and solid block. It is specifically designed for use with timber constructions.
Care: Avoid over-tightening the nail screw, as this could damage the surrounding material. Ensure the fixing is secure before applying any load. Regular inspection is not usually required, but check for any signs of loosening over time.