Frenchic Riad Red Wall Paint 2.5L - Red

While one coat might provide coverage, two coats are recommended by the manufacturer for the best depth of color and optimal durability and scrubbability. This ensures a long-lasting, beautiful finish.

A 2.5L tin can cover up to 35m² with a single coat. With the recommended two coats, the practical coverage is approximately 17.5m².

It is suitable for kitchen cupboards and interior walls. However, it is not recommended for very wet areas like shower enclosures or bath surrounds due to its water-based nature and scrubbable finish requirement.

The paint is completely scrubbable once cured, which typically takes about 7 days. Until then, avoid harsh cleaning.

Yes, the paint is EN71-3 certified, meaning it is safe for use on children's toys and in areas where children play or sleep.

Riad Red has an ultra-matte finish, which is non-reflective and provides a sophisticated, velvety look.

No, Frenchic paints are self-priming, meaning no separate primer coat is required on most standard interior surfaces.

Ensure the surface is clean, dry, and free from any contaminants like dust, grease, or old, flaky paint. For difficult surfaces, a light sanding may improve adhesion.

Apply the paint in thin, even coats. Use a good quality brush or roller and maintain a wet edge. Avoid overworking the paint. Allow adequate drying time between coats.

Apply a second coat as recommended. The ultra-matte finish and deep heritage tones benefit from a second layer to achieve full depth and vibrancy.

Stir the paint thoroughly. If absolutely necessary and per manufacturer guidelines, a very small amount of water might be added, but this can affect coverage and finish. It's generally best used as is.