Frenchic Wall Paint - Red

While suitable for general interior walls and ceilings, it is not recommended for very wet areas like shower enclosures due to moisture.

No, this paint is self-priming and self-sealing, eliminating the need for separate primer or top coats for most applications.

One coat offers good coverage, but two coats are recommended for optimal depth of colour and enhanced durability.

A 2.5l tin covers up to 35m² with a single coat. Two coats will cover approximately 17.5m².

Yes, it can be used on wooden floors, but ensure proper preparation and consider the foot traffic it will endure. Two coats are essential for durability.

Yes, it is EN71-3 certified, making it safe for use on children's toys and furniture.

The paint is washable after 24-48 hours, but it achieves its full scrubbable rating (ISO11998 Class 1 Wet Scrub) after approximately 7-14 days of curing.

Ensure the surface was properly cleaned, degreased, and dry before application. For difficult surfaces like laminate or tiles, ensure adequate preparation (light sanding or de-glossing) was performed.

Ensure paint is thoroughly stirred. Apply in consistent strokes, maintaining a wet edge to avoid lap marks. Use a high-quality brush or roller designed for water-based paints.

Ensure two coats have been applied. Colour perception can vary under different lighting conditions. Allow the paint to fully cure for accurate colour assessment.

Wait for the paint to fully cure (up to 14 days for maximum hardness) before attempting vigorous cleaning. Use a soft cloth and mild, non-abrasive cleaner. Ensure you are following the ISO11998 Class 1 Wet Scrub rating guidelines.