Polycell Multipurpose Polyfilla - White

No, this Polycell Quick Drying Polyfilla is specifically designed for indoor use only. It is not suitable for outdoor applications.

For best results, fill holes up to 5mm deep in a single application. For deeper repairs, apply in multiple thin layers, allowing each layer to dry before applying the next.

The filler is surface dry in as little as 5 minutes, depending on conditions. It can typically be painted over in approximately 20 to 30 minutes, though this can vary with temperature and humidity.

This multipurpose filler is suitable for use on plaster, wood, masonry, and stone.

Clean your filling knife and any other tools with warm water immediately after use, before the filler has a chance to dry.

To keep the filler fresh, ensure the membrane is replaced correctly, pressed onto the surface, and the lid is closed tightly. Store in a cool, dry place away from extreme temperatures and frost.

Yes, if necessary, you can lightly sand the filler once it is fully dry to achieve a perfectly smooth and level finish before painting.

This may occur if the hole is too deep for a single application. For repairs over 5mm, build up the filler in thin layers, allowing each to dry thoroughly before applying the next.

Ensure adequate ventilation in the room. Drying times can be longer in very humid or cold conditions. Check that the product has not passed its expiry date if stored for a long time.

Allow the filler to dry completely, then lightly sand the area with fine-grit sandpaper until smooth and flush with the surrounding surface.

Ensure the filler is at room temperature. If it feels stiff, a very small amount of water might help, but use sparingly to avoid compromising the filler's integrity. Ensure the tub has been stored correctly.