Frogtape Multi Surface Masking Tape - Green - 24mm x 41.1m

Frogtape is designed for use on cured painted walls, wood trim, glass, and metal.

Remove the tape slowly at a 45-degree angle while the paint is still slightly wet. If the paint is dry, use a hairdryer to heat it slightly before removing.

It is generally not recommended to use Frogtape on wallpaper, as it may damage the surface. Always test in an inconspicuous area first.

Remove the tape after the paint is dry to the touch, but before it fully cures, for the best results.

Yes, Frogtape is UV resistant.

When stored properly in its protective tub, Frogtape should last for several years.

Frogtape has a medium adhesion level, designed for a balance of secure hold and easy removal.

Ensure the surface is clean and the tape is pressed down firmly along the edges. Consider using multiple layers of tape.

Remove the tape while the paint is still slightly wet. If the paint is fully cured, use a hairdryer to gently heat the tape before removal.

Make sure the surface is clean and dry. Apply the tape firmly, pressing down along the edges. If necessary, use a different type of tape designed for your surface.