Best current price£7.31from Power Tools Direct
Shopping.co.uk recommended and popular offers
Power Tools Direct£7.31Visit shop Liberon Light 014425 Spirit Wood Dye Oak 250Ml
Visit shop
The Range£11.98Visit shop Liberon Spirit Wood Dye Antique Pine 250Ml - 126730 - Antique Pine
Visit shop78 offers from £7.31 - £26.77
View price history by clicking the chart icon.
For woodworkers and DIY enthusiasts seeking to enhance the natural beauty of wood, Liberon Medium Oak Spirit Wood Dye offers a traditional solution for rich, lasting color. Its key benefit is deep penetration into wood fibers, revealing vibrant grain patterns, especially on hardwoods. A potential caveat is its specific formulation, best suited for bare or previously finished wood rather than being a direct finish itself.
| Colour | Brown |
|---|---|
| Model Part Number | 126783 |
| Brand | Liberon |
It is ideal for bare hardwoods like oak and mahogany, as well as for coloring previously finished woods, making it suitable for antique restoration and DIY projects.
Yes, Liberon Spirit Wood Dye is a colorant and not a protective finish. A topcoat such as varnish, lacquer, or wax must be applied after the dye has dried to protect the color and the wood.
Tools used for application should be cleaned immediately after use with methylated spirit.
Yes, the dyes can be mixed together to achieve intermediate or custom shades, offering great creative flexibility.
The coverage is approximately 8-16 square meters per litre.
The dye has a minimum drying time of 6 hours.
No, Liberon Spirit Wood Dye is specifically designed for interior applications only.
Ensure the wood surface is uniformly prepared and free from dust or contaminants. Apply dye evenly with a brush or cloth, working with the grain. For very absorbent woods, pre-seal with a thinned sanding sealer and re-apply dye.
Apply a second coat of dye after the first coat has dried. Ensure the wood is properly prepared to accept the dye. Mixing dyes to create a stronger shade might also be necessary.
Ensure the hardwood is bare and lightly sanded. For extremely dense woods, a light scuff sanding might be required. Test application on a small, hidden area first.
This can occur on certain woods, especially pine. Apply the dye quickly and evenly. If blotching occurs, try applying with a damp cloth rather than a brush, or consider using a wood conditioner before dyeing.
Setup: Ensure the wood surface is clean, dry, and free from grease or old finishes. Lightly sand bare wood to open the grain for better dye penetration. For previously finished wood, test in an inconspicuous area. Wear appropriate protective gear, including gloves and eye protection, and ensure good ventilation.
Compatibility: Liberon Spirit Wood Dye is compatible with most dense hardwoods such as oak and mahogany, as well as pine and other softwoods. It can be applied over previously finished surfaces, but results may vary. It is *not* a final finish and requires a protective topcoat (e.g., varnish, lacquer, or wax) once dry.
Care: Clean application tools (brushes, cloths) immediately after use with methylated spirit. Store the dye in a cool, dry place away from direct sunlight and sources of ignition. Ensure the lid is tightly sealed.
